Epson 826W - PowerLite WXGA LCD Projector, User Manual

Page: 123 / 175

Solving Problems
123
The image isn’t square, but keystone-shaped.
■
If the top or bottom of the image is broader, press the or
button on the projector until the image is square.
■
If the projector is angled toward the screen from the left or right,
the image will be broader on one side. Center the projector in
front of the middle of the screen, facing the screen squarely.
■
Enable the Auto Keystone feature to automatically fix the shape.
See page 94.
The image contains static or noise.
■ If you’re using a computer cable longer than 6 feet, or an
extension cable, the image quality may be reduced. Use a
distribution amplifier for longer distances; you can purchase one
from Epson (see page 13).
■ Keep your computer and video cables away from the power cord
as much as possible to prevent interference.
■ The video signal may be split between the computer and the
projector. If you notice a decline in the projected image quality
when the image is displayed simultaneously on your notebook
computer and the projector, turn off the notebook’s LCD display.
■ Make sure the correct input signal is selected in the Signal menu
(see page 93).
■ If still images are jittery when you are projecting from a video
source, turn on the
Progressive
setting in the Signal menu (see
page 92).
■ Select
Noise Reduction
in the Signal menu, then try selecting
NR1
or
NR2
.
The image is blurry.
■
There may be dirt or smears on the lens. Clean the lens as
described on page 104.
■
Adjust the focus using the focus ring (see page 25).