Epilog Radius 4000 Owner'S Manual Download | Manualshive

Page: 54 / 54

background image

geometric shape like a circle.  The laser will cut entirely through the material, separating the
part from the background. For marking (engraving), the laser is swept across the work from
left to right, and the laser is turned on and off at the correct points to produce the first line of
the image.  Then the carriage advances one line and the process is repeated, eventually
assembling a full image.

Federal Communications Commission (FCC) Notice

NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy; and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.  Operation of this equipment in a residential area
is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.

54

«
...
52
53
54

Summary of Contents for Radius 4000























































Reviews:

No comments

Related manuals for Radius 4000

Brand: Octave Pages: 2

Brand: BadgePass Pages: 2

WORKCENTRE 5735

Brand: Xerox Pages: 50

Brand: Oki Pages: 1

Brand: MIMAKI Pages: 2

Brand: Lexmark Pages: 2

Brand: Ricoh Pages: 2

5550N - Phaser B/W Laser Printer

Brand: Xerox Pages: 16

Brand: Tinkerine Studio Pages: 17

WorkCentre 5845

Brand: Xerox Pages: 14

Brand: Xerox Pages: 6

Brand: Ice Pages: 114

Brand: Fujitsu Pages: 12

Brand: Fujitsu Pages: 264

Brand: Toshiba Pages: 242

Afinia Label L701

Brand: MyBinding Pages: 85

Brand: HiTi Digital Pages: 62

Brand: Ricoh Pages: 191

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands