Epilog Radius 4000 Owner'S Manual Download | Manualshive

Page: 31 / 54

background image

SECTION 7:

DOUBLE HEAD OPTION

Locate the components for the Double head option.

Connecting strut
Strut thumbscrews (2)
Bearing Plate
Optical Assembly
Bearing plate screws (2)

1)

With the machine off, open the door and slowly pull the “I” beam assembly
to the front of the machine to where it is a comfortable reach.

2)

Put the “V” groove bearings on the optical assembly up against the “V” on
the underside of the “I” beam.

3)

Put the bearing plate over the top of the optical assembly so the screw holes
align with the optical assembly, and put the screws in and tighten them.
Please be careful to keep the screws straight so they thread in properly. See
photo to verify part placement.

4)

Space the primary and secondary heads about 12 inches apart, and set the
connecting strut in between the heads. The flanges on the strut face down.
Align the holes in the end of the strut with the holes on the carriages, and
insert and tighten the thumbscrews.

Lay out your work on a maximum page size of 12” wide and 18” tall. If you try to go
beyond 12” width the machine will give an error and stop. Remember, the machine

«
...
29
30
31
32
33
...
»

Summary of Contents for Radius 4000























































Reviews:

No comments

Related manuals for Radius 4000

Brand: Lanier Pages: 6

Brand: Nanoptix Pages: 25

Brand: Nanoptix Pages: 4

Brand: Xerox Pages: 324

Brand: Citizen Pages: 4

Brand: AGFA Pages: 266

Brand: Velleman Pages: 44

Brand: Aleph Objects Pages: 26

Brand: Ricoh Pages: 2

Brand: Olivetti Pages: 132

Brand: Oki Pages: 174

4510B - Phaser B/W Laser Printer

Brand: Xerox Pages: 10

Duplicator 7 Plus

Brand: WANHAO Pages: 28

Brand: Canon Pages: 1154

Brand: Canon Pages: 70

ActionPrinter 3250 - ActionPrinter-3250 Impact Printer

Brand: Epson Pages: 22

ActionPrinter 4000

Brand: Epson Pages: 2

ActionPrinter 3260 s

Brand: Epson Pages: 116

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands