SECTION 11:
MEMORY CONFIGURATION
The Epilog Radius memory buffer allows you to download any size single file of up to 16 MB
in size. The file will remain in memory as long as the machine is turned on or until you send
down another job. Pressing the repeat button after the file has engraved will repeat the job.
If you have a file that is larger than 16 MB the laser will automatically go into “rolling buffer”
mode. In rolling buffer mode the laser accepts 16 MB of data then starts to discard used data as
it engraves to make room for additional new data. If you print a file larger than 16 MB to the
laser it will engrave the entire job, but you will not be able to repeat that job. If you want to
repeat a job that is larger than 16 MB you will need to download it to the laser from your
computer.
Please be aware that if you are sending a job that is 16 MB or larger to the laser much of the
file will continue to spool from your computer after the print window has disappeared. You
need to check your print window and insure that the entire file has printed before you switch
ports or turn off your computer. Failure to do so will result in a loss of data to your laser.
