REV. 07/2016
ELECTRICAL SYSYTEM
8
137
Error Message
Possible cause
Fault elimination
DATA
ACQUISITION
This alarm is signalled in the current gain
acquisition phase.
Wait the end of the acquisition activity.
CAN BUS KO
The diagnosis of the CAN-BUS line is
present only if the inverter uses this link
(depends on the software version). It is
signalled if the inverter does not receive
any message from the CAN-BUS line.
First of all, check the wiring. If
it is ok, the problem is on the logic
board, which must be replaced.
SAFETY
T h i s a l a r m i s s i g n a l l e d w h e n t h e
" S A F E T Y " i n p u t i s o p e n . T h e
"SAFETY"circuit gets active and opens
the drivers of LC and EB and stops the
machine.
Verify the “SAFETY” input connection
SAFETY KO
This alarm is present in combi systems
(tr pump).
If a stopping alarm is detected on the
pump, the traction also stops. The
failure must be looked for in the pump
inverter.
ENCODER ERROR
Two consecutive readings of the encoder
speed are too much different in between:
because of the inertia of the system it
is not possible the encoder changes its
speed a lot in a short period. Probably an
encoder failure has occurred (e.g. one or
two channels of the encoder are corrupted
or disconnected).
Check both the electric and the
mechanical encoder functionality.
Also the electromagnetic noise on the
sensor bearing can be a cause for the
alarm.
Summary of Contents for CQD16
