EP Equipment CQD16, Service Manual

Page: 51 / 251

37
REV. 07/2016
CHASSIS SYSTEM
4
4.5 Brakes
4.5.1 Removal and Installation
Removal
-
-
-
Remove the load wheel; (see Section 4.1.1)
Unscrew the four screws (1), loosen the
connection between the brake (2) and the
chassis;
Remove the rigid pipe (3) attached to the
brake cylinder and remove the brake (2).
Installation
- Install according to the reverse order of rem-
oval;
Adjustment
- Toggle the toothed fl ange on the lash adjuster
with slotted screwdriver through the opening
on brake bottom plate, such operation can
change the length of the adjuster, thus
playing the role of adjustment.
Brake bottom
plate
Slotted
Screwdriver
Lash adjuster
Upon maintenance or replacement for parts
of the brakes, please refer to Figure 90109 for
removal and installation.