EP Equipment CQD16, Service Manual

Page: 27 / 251

13
REV. 07/2016
MAINTENANCE
2
Table 2.1 Inspection & Maintenance List
Interval in days/months/years 7 d 60 d 90 d 6 m 1y
Interval in hours 50 150 250 500 1000
Functions and Control
Check the functions of the operation switches and
display
A
Check alarm system functions A
Check foot switch functions A
Check the emergency switch functions A
Check the cables for damage and if the terminals are
secure
A
Check the electronic limit functions A
Check and tighten the controllers and contactors A
Check height display functions A
Check fault information records and operating hours A
Power Supply & Drive System
Check the battery cables for damage and replace if
necessary
A
Check the battery charge connector A
Check if the cable connections between battery mon-
omers are secure, apply some grease to electrodes if
necessary
A
Check electrolyte fl uid level A
Check electrolyte density A
Check battery temperature A
Check battery locking mechanism A
Check and tighten motor mounting bolts A
Check the connections of motor connectors A
Check the position of various bearings for noise A
A = Check / Adjust
Please refer to Inspection & Maintenance List
for regular inspection and maintenance of the
vehicles.
L = Lubrication
Under harsh conditions, the lubrication intervals
should be shortened by half.