28
Installation Instructions - EmoTouch 3
Mounting
EN
6
Hook the relay box into the upper screw using the upper mounting hole.
7
Securely tighten the relay box using the two lower mounting holes.
Once you have completed all installation work you can connect the
consumers and plug in the lines.
5.3 Setting the jumper for maximum heating time,
5.5 Connecting and configuring consumers,
4.4 Control panel
The EmoTouch 3 control panel is designed for mounting in the wall. If
empty conduits for electrical installations are already present, this dictates
the position of the control panel.
The control panel must only be mounted outside of the cabin. The out-
side wall of the cabin is the preferred mounting location.
Installation depth in the wall min. 35 mm
With a line length over 25 m: Bus amplifier with power adapter (230 V
mains connection) required. A socket near the installation location of
the control panel is required for this (max. 1.5 m away).
Max. line length: 50 m.
NOTICE
Damage due to steam and humidity
Steam can escape when the door is opened, which can fog over
the control panel. This can lead to the formation of condensation
in the control panel and system downtime.
Mount the control panel far enough away from the area where
steam is emitted and can spread.
Mount the control panel on the hinge side of the door.
A
Top mounting hole
B
Lower mounting holes
A
B
B
