EmoTouch 3 - Installation Instructions
31
Mounting
Create wall cut-out and lay the control line
1
Determine a suitable location for the installation.
2
Prepare a wall cut-out:
3
NOTICE Do not pull at the plug when routing the control line(s). Doing
so could damage the line. Attach the taut wire only to the cable.
Route the control lines from the relay box to the control panel.
The smaller RJ10 plug on the connecting cable must be routed to the
control panel.
Mounting the housing
1
NOTICE The control panel's housing and display are not mounted upon
delivery. Do not drop the control panel. The display's glass plate cannot
be replaced. Remove the protective film from the panel after mounting
is completed.
Insert the two removal tools in the slot at the base of the
control panel and carefully remove the display.
Mounting depth: min. 37 mm
Height x width = 128 x 189 mm
The mid-point of the control panel should be at eye level.
128
37
189
142
202
