EmoTouch 3 - Installation Instructions
57
Installing multiple cabins
7.1.1 Configuration 1– 8 sauna cabins
Operating mode – standard
In this configuration, one steam generator or one sauna heater is
operated per cabin.
The lines are connected as follows:
All relay boxes are set by the factory to cabin address 1.
See also the following figures:
Jacks – sauna cabin relay box,
Jacks – EmoTouch 3 circuit board,
Setting
Operation mode
1 Steam cabin
with up to 4
Steam generators
and optional
up to 4 additional
cabins
2 Steam cabins
each with up to
4 Steam genera-
tors
2 Steam cabins
each with up to
2 Steam genera-
tors and optional
up to 4 additional
cabins
01. June 2019
Default: up to 8
Cabins
08:44:40
Cabin no.
Relay box connection – control panel
Cabin address
1
The relay box is connected to the jack #1 of the control
panel using the sauna bus cable.
Relay box remains set to address 1.
2
The relay box is connected to a free sauna bus jack in the
relay box of cabin #1.
Relay box is set to address 2.
3
The relay box is connected to jack #2 of the control panel
using the sauna bus cable.
Relay box is set to address 3.
4
The relay box is connected to a free sauna bus jack in the
relay box of cabin #3.
Relay box is set to address 4.
5
The relay box is connected to jack #3 of the control panel
using the sauna bus cable.
Relay box is set to address 5.
6
The relay box is connected to a free sauna bus jack in the
relay box of cabin #5.
Relay box is set to address 6.
7
The relay box is connected to jack #4 of the control panel
using the sauna bus cable.
Relay box is set to address 7.
8
The relay box is connected to a free sauna bus jack in the
relay box of cabin #7.
Relay box is set to address 8.
