EmoTouch 3 - Installation Instructions
43
Electrical installation
Setting JP5 for heating time
1
WARNING! Ensure that the relay box has no power.
Open the housing.
2
Set jumper JP5 to the desired runtime.
5.4 Connecting data lines
Connecting data lines
1
WARNING! Ensure that the relay box has no power.
Open the housing.
2
Route the line through the openings at the base or on the back of the
housing.
3
Plug the S-Bus line RJ10/RJ14 from the control panel into the free jack
RJ12 (S-BUS).
Connect shielding of the line to ground if necessary.
JP5
A
RJ10 plug for sensor line
B
RJ14 plug from control panel
A
B
