EmoTouch 3 - Installation Instructions
11
Identification
2.1.2 EmoTouch 3 control panel
The nameplate is attached to the back of the control panel.
Nameplate (example)
Requirements for operation and storage
The control panel must be installed outside of sauna cabins only. The
mounting location must meet the following climate condition require-
ments:
Ambient temperature during operation -10°C to 35°C
Storage temperature: -20°C to 60°C
2.2 Intended use
In conjunction with a suitable sauna heater, the EmoTouch 3 control unit is
intended to be used only to heat sauna cabins. It is suitable for cabins used
in private and commercial settings.
The relay box and control panel are intended only for mounting on the
wall.
The control unit is not suitable for outdoor use.
It must be operated only inside buildings and may not be exposed to envi-
ronmental conditions such as extreme humidity and moisture or the possi-
ble formation of condensation or corrosive substances in the ambient air,
as well as other weather conditions. Similarly, excessive cold and extreme
exposure to sunlight must be prevented. Protect the unit accordingly if
there is an increased risk of mechanical damage.
A
Name
F
Country of origin
B
Model
G
Manufacturer
C
Item number
H
Manufacturing date
D
Operating voltage
I
Serial number
E
Maximum switching output (kW)
Saunasteuergerät/Control unit
IPX4
Type EmoTouch 3 Bedienteil / Control Panel
Art. Nr. 94 6505 00
400 V 3N AC 50 Hz
Max. Schaltleistung 9 kW
Made in Germany
EOS SAUNATECHNIK GmbH, 35759 Driedorf
S-No.
00109
15.19
A
B
C
D
E
F
G
H
I
