INTRODUCTION
Product Specifications
15 |
P a g e
Copyright © 2021 BF ENTRON and/or its affiliates. All rights reserved
Product Model:
iPAK2v2
Firmware Version:
V2.10
May 22 | Doc No 700253-2
•
Four modes of programming control (WSP3 Hand Held Pendant, NetFlash™ Software, MODBUS,
Ethernet/IP)
•
Analog control mode
•
Force profiling
•
Electrode management (stepper functions)
•
Current and Force monitoring
•
C-Monitor checks secondary circuit for shunting or wear conditions
•
Communication via Ethernet/IP, RS232 for WSP3 Pendant, RS485, MODBUS TCP/IP, or MODBUS RTU
An iPAK2v2 weld control is also available in Multi-Welder (Cascade) configurations. This configuration type allows a user
to control multiple weld transformers and multiple weld actuators with a single control. The features of the multi-weld
configuration are:
•
Control up to 8 weld transformers
•
Control up to 8 weld valves (WAV)
•
7 auxiliary valves under program control
•
Electrode manager (stepper function) for up to 8 electrodes
For more information on multi-welding refer the section Multi-Welding Machine of this manual.
2.3
Product Specifications
The iPAK2v2 Weld Control is available in various current outputs and the product specifications for the standard iPAK2v2
product line is defined in this section.
