Quad User Modules
User Manual
80-14001000-03
4–8
H) CTS
Selects the required CTS.
A) NORMAL (F)
Output comes from the
SBUQHS.
B) FORCED ON
Output is forced on from the
SBUQHS.
C) FORCED OFF
Output is forced off from the
SBUQHS.
D) FOLLOWS DCD
Output follows the state of the
DCD output.
I) RTS
Selects the required RTS input.
A) NORMAL (F)
Input comes from the DTE.
B) FORCED ON
Input is forced on in SBUQHS.
C) FORCED OFF
Input is forced off in SBUQHS.
J) LAL
CONTROL
Selects if the loop pin on the SBUQHS is enabled (pin
L on V.35 rear interface card).
A) DISABLED (F)
Disables the loop pin input.
B) ENABLED
Enables the loop pin input.
4.4.3.2 Call control menu
A) ANSWER
Determines how the SBUQHS responds to an
incoming call.
A) AUTO (F)
Answers an incoming call
automatically.
B) CLID
Answers the call only if the
originating number matches
a number in the CLID store.
Otherwise the call is
rejected.
C) MANUAL
Awaits the user to command
the SBUQHS to answer.
Summary of Contents for SBUQHS/QHB
Page 92: ...Menu Diagrams 80 14001000 03 12 3...
Page 93: ...Quad User Modules User Manual 80 14001000 03 12 4 12 1 2 SBUQLS QLB Operation Menu...
Page 94: ...Menu Diagrams 80 14001000 03 12 5 12 2 SBUQHS 12 2 1 SBUQHS QHB Operation Menu...
Page 95: ...Quad User Modules User Manual 80 14001000 03 12 6 12 2 2 SBUQHS QHB Configuration Menu...
