Enterasys SBUQHS/QHB, User Manual

Page: 56 / 96

Quad User Modules
User Manual
80-14001000-03 4–6
4.4.3 Edit Store Menus
A) INTERFACE See section 4.4.3.1
B) CALL CONTROL See section 4.4.3.2
C) LEASED CIRCUIT FAILURES See section 4.4.3.3
D) BACKUP See section 4.4.3.4
E) RESTORE See section 4.4.3.5
F) TIME WINDOWS See section 4.4.3.6
G) ISDNTEST See section 4.4.3.7
4.4.3.1 Interface menu
A) COMMAND
MODE
Selects the type of call control for the user port.
A) DTR
ORIGINATE (F)
4
DTR call control as originating
calls when C/DTR goes ON.
B) DTR ANSWER DTR call control as answering
calls when C/DTR goes ON.
This setting overrides the
ANSWER MAN/AUTO setting.
F) BACKUP (F)
4
Automatic backup and restoral
control.
B) I-MUX
MODE
A) MODE1 N x 64 (F)
B) MODE3 N x 64 (Additional Channel)
Options ‘C’ and ‘D’ below prompt the user to enter a value
for the number of ‘B’ channels. The maximum is 30 for
Mode1, and 29 for Mode3, with a default of 4 ‘B’ channels
(256kbit/s) for both the Desired and Fallback speeds.
4
The default is DTR Originate for CBUQHS, but it is Backup for CBUQHB.