Enterasys SBUQHS/QHB, User Manual

Page: 61 / 96

Command Port Interface (SBUQHS/QHB)
80-14001000-03 4–11
D) RXDATA
Receive data transitions must be
received for the duration of the
dataloss timer, for auto restoral to
occur.
E) L/CCT T/W
TIMER
The time that Talkwire must be
active for restoral to occur.
C) C/DTR A) ENABLED
C/DTR going OFF will cause
restoral irrespective of the
detected status of the DLC.
B) DISABLED (F) C/DTR is ignored for restoral.
4.4.3.6 Time Windows menu
CAUTION:
Whenever setting up Time Windows, it is necessary to wait 1
minute after configuration, to ensure erroneous backup does
not occur outside the window times that have been set.
Erroneous backup can occur due to delay in the system with
recognising changed times.
It is also strongly advisable to test auto backup operation in all
time windows that have been set, to ensure the window
settings operate as desired. This can be done by changing the
Manager card time and then checking all the window
boundaries. No one likes large ISDN call bills!
A) MODE A) DISABLED (F)
Time Windows ineffective.
B) BACKUP Effective in backup mode only.
C) BACKUP AND
RESTORE Effective for both backup and
restoral.
B) DISPLAY WINDOWS