Enterasys SBUQHS/QHB, User Manual

Page: 38 / 96

Command Port Interface (SBUQLS/QLB)
80-14001000-03 3–9
C) SPEED
Selects desired speed for the user port.
A) 300 Asynchronous operation
only.
B) 600
C) 1K2
D) 2K4
E) 4K8
F) 9K6
G) 19K2
H) 38K4
I) 48K Synchronous only.
J) 56K Synchronous only.
K) 64K (F)
Synchronous only.
L) SWITCHED 56k Synchronous only. This
must be set for calls to USA
where 7 bit structured 56K
networks are used.
D) USER RATE
NOTIFICATION
A) DISABLED (F)
User rate information not
sent.
B) ENABLED Enables the transmission of
the user rate speed
information in the ISDN call
setup.
E) C/DTR
Selects what the DTR or C input should be.
A) NORMAL (F) Input comes from the DTE.
B) FORCED ON Input is forced on in
SBUQLS/QLB.
C) FORCED OFF Input is forced off in
SBUQLS/QLB.