Access Control List Screen
4-28
Device Configuration Menu Screens
Field Descriptions
Refer to
Table 4-7
for a functional description of each screen field.
Table 4-7
Access Control List Screen Field Descriptions
Use this field…
To…
Access Control Lists
(Toggle)
Enable or disable to restrict SNMP/IP access to a limited number of IP
addresses. This field toggles between ENABLED and DISABLED.
DISABLED is the default setting.
When ACL is enabled, all SmartSwitch device access is limited to the
16 IP addresses shown in the screen. The limited access applies to all
IP access including, but not limited to, SLIP/PPP connections, Telnet,
Ping, SNMP and HTTP. When locally connected to the COM port of
the host SmartSwitch device, ACL does not restrict access to local
management.
ACL cannot be enabled unless a valid IP address is listed.
When ACL is disabled, host access is not restricted to the devices with
an IP address in the Access Control List.
IP Addresses
(Modifiable)
Display or enter the IP address of devices that you want to have access
to SNMP/IP management. Up to 16 IP addresses can be entered. Only
a user with a Super User status can view and modify the ACL.
NOTE: Clearing NVRAM will remove all IP address entries and
return the access control state to Disabled.
