14
Entek IRD 6666 and 6667 Protection Monitors
Configuration
5.
Note that the highlight moves to the next option in the menu. You can then repeat the
above steps to change other options.
When you exit from either the User or the Factory menu, the monitor saves any changes
and starts using the changed values immediately.
User Menu Configuration
The User menu allows you to set the following:
z
Date and time
z
Alert and Danger alarm setpoints for the six channels
z
Danger alarm relay inhibition (to prevent Danger alarm relay trip on Danger alarm;
used when servicing the system to prevent false alarm relay trips)
The controls to access the User menu and configure the 6666 and 6667 monitors are all on
the front panel of the monitor. The User menu is identical for both the 6666 and 6667. See
“Front Panel Description” on page 3 for a picture of the front of the monitor.
To display the User menu
To display the User menu, press and hold both the Up Arrow and Down Arrow buttons
until the User menu appears. This takes about 4 seconds.
Note that the first option of the User menu is highlighted (CLOCK). This means it appears
in green text on a black background (inverse video) on the monitor display. Move the
highlight by pressing the Up Arrow or Down Arrow button, and select the highlighted
option by pressing the SEL button.
ALERT 2
DANGER2
ALERT 3
DANGER3
EXIT
SET
ALERT 1
DANGER1
User menu
ALM 1-3
ALM 4-6
INHIBIT
EXIT
SET
CLOCK
