EnGenius ECB-3220 User Manual Download Page 30

Page: 30 / 51

11g Wireless Client Bridge/AP

Version 1.36

System

Uptime:

Duration of time since the device was last reset.

Firmware version

: Version of the firmware that is currently loaded on the

device.

Wireless Configuration

Mode

: Wireless configuration mode such as client bridge, AP, or WDS.

Band

: Frequency and IEEE 802.11 operation mode (b-only, g-only, or b+g).

SSID

: The name used to identify the wireless network.

Channel Number

: The channel used to communicate on the wireless

network.

Encryption

: The type of security used on this network. It may be disabled,

WEP, WPA, etc.

BSSID

: The MAC address of the SSID.

Associated Clients

: Displays the number of clients currently associated to

the Access Point.

TCP/IP Configuration:

Attain IP Protocol

: The IP address setting may be fixed or static.

IP Address

: Displays the current IP address of the LAN port.

Subnet Mask

: Displays the current subnet mask for the IP address.

Default Gateway

: Displays the default gateway for the device.

DHCP

: Displays the DHCP setting.

MAC Address

: Displays the MAC address of the device.

5.2 Management

Click

the

Management

link on the navigation

drop-down menu. You will then see five options:
operation mode, status, statistics, log, upgrade
firmware, save/reload settings, and password.
Each option is described below.

5.2.1 Operation Mode

Click on the

Operation Mode

link under the

Management

menu. The

Operation

Mode

allows you to switch from Access Point to Client Bridge mode.

Summary of Contents for ECB-3220




















































Search results

Summary of Contents for ECB-3220

Reviews:

Related manuals for ECB-3220

Brands by name

Popular brands

EnGenius ECB-3220, User Manual

Search results

Summary of Contents for ECB-3220

Reviews:

Related manuals for ECB-3220

Brands by name

Popular brands