background image

11g Wireless Client Bridge/AP 

 

 

 

 

                         Version 1.36 

 

 

 34 

 

 

 

5.2.5 Upgrade Firmware 

ƒ

  Click on the 

Upgrade Firmware

 link under the 

Management

 menu. This page is 

used to upgrade the firmware on the device. Make sure that downloaded the 
appropriate firmware from your vendor.  

 
 
 
 
 
 
 
 
 
 
 

ƒ

  Click on the Browse button and then select the appropriate firmware and then click 

on the 

Upload

 button.  

Note: The upgrade process may take about 1 minute to complete. Do not power off 
the device during this process as it may crash the device and make it unusable. The 
device will restart automatically once the upgrade is complete.  

 

5.2.6 Save / Reload Settings, Reset to Default 

ƒ

 

Click on the 

Save / Reload Setting

 link under the 

Management

 menu. This option is 

used to save the current settings of the device in a file on your local disk or load 
settings on to the device from a local disk. This feature is very handy for 
administrators who have several devices that need to be configured with the same 
settings.  

ƒ

 

This page also allows you to reset the device to its factory default settings.  

 
 

 

 
 
 

 

Summary of Contents for ECB-3220




















































Reviews: