11g Wireless Client Bridge/AP
Version 1.36
22
Network Type:
Select
Infrastructure
or
Adhoc
from the drop-down list.
Infrastructure is a point-to-multipoint (PtMp) topology where as Adhoc is a point-to-
point topology (PtP).
SSID
: The SSID is a unique named shared amongst all the points of the wireless
network. The SSID must be identical on all points of the wireless network and cannot
exceed 32 characters. Enter the MAC address of AP Radio IF for
Desired BSSID
.
Channel
: Select a channel from the drop-down list. The channels available are
based on the country’s regulation. When selecting Infrastructure mode, a channel is
not required, however, when selecting Adhoc mode, you must select the same
channel on all points.
Enable MAC cloning
: Change the Bridge’s MAC to the connected Client’s MAC
which is the first client connects with Bridge. This function only allow one Client
connect to network.
Clone MAC Address
: Bridge’s MAC will be defined by the value in blank space.
Click
on
the
Apply Changes
button to confirm the changes. This device will
automatically restart once these changes have been applied.
4.4.2 Advanced Settings (Infrastructure, Adhoc)
Click on the
Advanced Settings
link under the
Wireless
menu. On this page you
can configure the advanced settings to tweak the performance of your wireless
network. Options available are: fragmentation threshold, RTS threshold, beacon
interval, output power, preamble type, and 802.11g protection.
