EnGenius ECB-3220 User Manual Download Page 48

Page: 48 / 51

11g Wireless Client Bridge/AP

Version 1.36

5.4.5 WDS

Click

the

WDS

link under the

Wireless

menu. On this page you can configure the

WDS (Wireless Distribution System) which allows the Access Point to function as a
repeater.

Enable WDS:

Place a check in this box to enable this feature.

Add WDS AP:

Enter the MAC address of the Access Point that will join the WDS

network along with a comment about the AP.

Current WDS AP list:

This table lists MAC addresses; you may delete selected

MAC address or delete all the addresses from the table by clicking on the associated
buttons.

Click

the

Apply Changes

button to confirm the changes. This device will

automatically restart once these changes have been applied.

Click on the

Set Security

button to configure the security settings.

Summary of Contents for ECB-3220




















































Search results

Summary of Contents for ECB-3220

Reviews:

Related manuals for ECB-3220

Brands by name

Popular brands

EnGenius ECB-3220, User Manual

Search results

Summary of Contents for ECB-3220

Reviews:

Related manuals for ECB-3220

Brands by name

Popular brands