ENFORCER
Heavy-Duty Outdoor Access Control Keypad with Proximity Reader
SECO-LARM U.S.A., Inc.
31
Programming the Door Open Alarm and Timing:
Programming the Egress Delay/Warning/Alarm:
Programming the Door-Propped-Open Warning and Delay Time (Cont.):
With most keypads, the egress button provides a simple way for someone inside a protected
premise to exit through a locked door by pressing a button instead of using a keypad. However, in
some situations, delaying the egress operation and/or providing some warning when the egress
button is used is desirable.
For example, in hospitals or schools, it may be desirable to delay the egress operation and provide
a warning to prevent patients or young children from easily leaving the protected area.
For simple egress with no delay, warning, or alarm do not change this setting. It is disabled by
default.
If the keypad is connected to a magnetic contact or other door monitoring device, it can be
programmed to trigger the alarm output for 1 to 999 seconds if the door is opened. In this case, if
the alarm output is triggered, the output either automatically ends at the end of the programmed
time or when a user code or super user code is input for output #1.
To Program:
•
Door open alarm OFF (default):
•
Door open alarm ON:
NOTES:
•
represents the alarm output time, which can be set from 1 to 999 seconds.
•
If programmed for door open alarm, the alarm will output if the door is forced open without using
a user code and/or card. The alarm will not output if the door is opened with a user code and/or
card.
•
The door open alarm and door-forced-open warning should not both be enabled, as the overlap
in timing could result in incorrect alarm output (see "Programming the Door-Forced-Open
Warning and Timing," pg. 30).
•
The "K or A" jumper must be set to "A" for the alarm output to function correctly (see the "Jumper
Settings" table, pg. 9).
NOTES:
•
represents the delay time, which can be set from 1 to 999 seconds.
•
The delay time provides time for a door to close normally before triggering the door-propped-
open warning.
•
The door-propped-open beeping will stop when the open door is closed.
•
The alarm output cannot be programmed to operate with the Door-Propped-Open Feature.
