ENFORCER
Heavy-Duty Outdoor Access Control Keypad with Proximity Reader
SECO-LARM U.S.A., Inc.
13
Getting Ready to Program:
Sample Applications for Auxiliary Terminals (Continued):
Codes and/or Cards:
The keypad can be set to be activated by users in one of three ways:
1.
Keypad code only – There are five types of keypad codes:
•
Master programming code – Used only for entering programming mode; there can be only
one master programming code per keypad.
•
Super user code – Can be used to activate outputs #1, #2, and #3 to disable (inhibit) or
enable the operation of the outputs.
•
User codes – Unique codes for each user to activate outputs #1, #2, or #3.
•
Visitor codes – Temporary user codes that can be assigned to visitors or temporary workers
to activate output #1; the visitor codes can be programmed for one-time use or to expire after
a set number of hours has passed.
•
Duress codes – Assigned to specific users as a way to send a silent alert if forced to use the
keypad under duress.
2.
Proximity card only – Standard 125kHz (EM125) proximity cards can be used to activate
outputs #1, #2, or #3.
3.
Card + code – For enhanced security, the user can be required to also enter a code after
tapping a proximity card. The code may be unique to each card or to a group of users, or a
common code can be used with all cards.
Duress Output:
The Duress Output switches to (–) ground when a duress code is entered. You may use it to turn
on an LED lamp and/ or a small buzzer to notify a guard; or connect it to a 24 hour Normally Open
protection zone of an alarm system.
NOTE:
Only one connection option is recommended. Make sure that the sink current does not
exceed the maximum rating of 100mA.
Low power
piezo buzzer
1.5K
LED
OR
+12VDC
Alarm Control Panel
24-Hour
N.O. Protection
Zone
