ENFORCER
Heavy-Duty Outdoor Access Control Keypad with Proximity Reader
18
SECO-LARM U.S.A., Inc.
Programming the Super User Code (Continued):
Deleting the Super User Code:
This function is useful for protecting the premises in case the super user code is forgotten.
To delete a super user code:
1.
Make sure the keypad is in programming mode (see pgs. 14~15):
2.
Enter:
Using the Super User Code:
In these examples, assume the super user code is
.
1.
Activate or deactivate output #1 (timed or toggle, depending on programming):
2.
Activate or deactivate output #2 (timed or toggle, depending on programming):
3.
Activate or deactivate output #3 (timed or toggle, depending on programming):
4.
To toggle operation of output #1 ON or OFF:
NOTES:
•
This function is used to leave output #1 active for extended periods of time.
•
Do not forget to deactivate this function after its use is no longer required.
•
It is recommended to only use this function with fail-safe locks.
5.
Temporarily pause or restart the timed output #1 disable period:
NOTES:
•
This function is used to enable the operation of output #1 if it was disabled using the
output #1 auto-disable function (see pgs. 26~27).
•
When the output #1 auto-disable function is inactive, the red LED will flash steadily. This
indicates that output #1 may now be used.
