ENFORCER
Heavy-Duty Outdoor Access Control Keypad with Proximity Reader
16
SECO-LARM U.S.A., Inc.
Programming Format and Default Programming Values:
In this manual, the format used for programming the keypad is as follows:
•
A 2-digit (
) FUNCTION identifier to tell the keypad what is being programmed.
•
A varying number of digits (
) to represent the parameters of that FUNCTION.
•
The
key to confirm programming of the FUNCTION.
The following is a list of the different programming functions:
Function Parameters
Default Functions and Values
Page #
01
Master programming code
Default 0000, code length from 4~8 digits
17
02
Super user code
No default, must be programmed
17~19
03
Common user code for output #1
No default, must be programmed
19
04
Common user code for output #2
No default, must be programmed
19
05
Common user code for output #3
No default, must be programmed
19
10
User codes/cards for output #1
No default, must be programmed
20~21
20
User codes/cards for output #2
No default, must be programmed
20~21
30
User codes/cards for output #3
No default, must be programmed
20~21
40
Visitor codes for output #1
No default, must be programmed
22
41
Duress codes for output #1
No default, must be programmed
23~24
42
Duress codes for output #2
No default, must be programmed
23~24
43
Duress codes for output #3
No default, must be programmed
23~24
51
Output mode for output #1
5-Second output, momentary
25
52
Output mode for output #2
5-Second output, momentary
25
53
Output mode for output #3
5-Second output, momentary
25
55
System real-time clock
No default, must be programmed
26
56
Output #1 auto-disable time
No default, must be programmed
26~27
60
Wrong-code system lock-up
Locks keypad after 10 false code/card tries
28
70
User code entry mode
Manual entry of “#” after each code
28~29
71
Keypad sounds
Programming and operation beeps enabled
29
72
Output relay activation sounds
1-Second beep when output is activated
29
73
Amber LED standby flashing
Center LED flashes on standby
29
80
Door-forced-open warning
Warning disabled
30
81
Door-propped-open warning
Warning disabled
30~31
90
Egress delay/warning
Egress output happens immediately
31~33
91
Door open alarm and timing
Alarm output is disabled
31
NOTE:
The Direct Access to Programming (DAP) code 2828 (pg. 33) and the system restore code
9999 (pg. 15) are fixed and cannot be changed, even via programming.
