ABN 27 106 103 315
(03) 8789 1342
Genuine KPX7v2 Tri-Tran Wireless Keypad
Storing your PIN Code
Note:
There is a timeout of approximately 5 seconds after the last button is
pressed.
a.
Enter 1111 followed by the hash (#) key.
b.
Press and hold the hash (#) key again. The keypad will beep for
approximately 5 seconds. Once the beeping stops, release the hash (#) key.
Enter the new pin code followed by the hash (#) key. Re-enter the new pin
code followed by the hash (#) key to confirm. A short string of beeps will be
produced to confirm the acceptance of the new pin code.
c.
Test operation using the new code. Enter the new code followed by the
hash (#) key. Press and hold any button from 1-8 and you should hear a
continuous string of beeps.
Note:
If you lose or forget a code, you will need to return the Keypad to B&D
Doors for reprogramming. A charge will apply for this service.
