RE352_DSC-Compat_PIN-Pad
Page 1 of 3
30-Oct-14
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
RE352 DSC-Compatible PINpad™
Features
•
Secure, 4-digit Code to disarm
•
1-button arming
•
Red/Green LED arming feedback
•
Small, yet comfortable keypad
•
Mounts on wall via VHB® tape, or screws
•
Secure for carrying in purse or mounting on car visor
•
Strong, reliable RF signal.
•
4-6 year battery life on CR2032 battery.
Key Instructions
•
Enroll as a Key Fob.
•
Code programming
Default access code is “1234”.
To change access code:
1.
Enter current 4-digit access code.
2.
Within 4 seconds, press and hold the “1” and “3” keys
simultaneously. After 3 seconds, Red LED will be lit.
3.
Enter new 4-digit access code. After successfully changing
the code, the Green LED will be lit
4.
Note new access code . BAD GUY CANNOT RESET CODE.
So it must be noted and remembered!
•
Enrolling:
1.
Refer to the DSC control unit installation manual.
2.
If panel is capable of Wireless Enrollment Mode, put the
control panel in that mode and both the STAY or AWAY
buttons for 3 seconds.
Or, put panel in Serial Number Entry Mode and program in
the printed ESN.
3.
Set up as you would a WS4939 4-Button Fob.
Operation
PINpad
Button
Panel Action
LED
Stay
ARM STAY
flashes double red
Away
ARM AWAY
flashes double red twice
PIN Code
DISARM
flashes double green
Stay + Away
PANIC ALARM
flashes red 8 times
RE352_DSC-Compat_PIN-Pad
Page 2 of 3
30-Oct-14
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
Pictures
Battery Replacement
CR2032 Battery
+ Terminal up
Insert Screwdriver
here
to open
Red/Green
Status LED
Shows command sent
Stay + Away
=
Panic (Enroll)
TO CHANGE PIN CODE:
Current 4-digit access code, and then…
1 + 3
Red LED,and then…
Enter New Code