Endress+Hauser Proline Promag W 500, Operating Instructions Manual

Page: 165 / 262

Proline Promag W 500 PROFINET Operation
Hauser 165
11.5 Adapting the measuring device to the process
conditions
The following are available for this purpose:
• Basic settings using the Setup menu (→  115)
• Advanced settings using the Advanced setup submenu (→  139)
11.6 Performing a totalizer reset
The totalizers are reset in the Operation submenu:
• Control Totalizer
• Reset all totalizers
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n
→  165
Preset value 1 to n →  165
Reset all totalizers →  165
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Control Totalizer 1 to n A process variable is selected
in the
Assign process variable
parameter of the Totalizer
1 to n submenu.
Control totalizer value. • Totalize
• Reset + hold
• hold
• Reset + totalize
• totalize
• Hold Totalize
Preset value 1 to n A process variable is selected
in the
Assign process variable
parameter of the Totalizer
1 to n submenu.
Specify start value for totalizer.
Dependency

The unit of the selected
process variable is
specified for the totalizer
in the
Unit totalizer
parameter.
Signed floating-point
number 0 l
Reset all totalizers – Reset all totalizers to 0 and
start. • Cancel
• Reset + totalize Cancel
11.6.1 Function scope of the "Control Totalizer" parameter
Options Description
Totalize The totalizer is started or continues running.
Reset + hold The totaling process is stopped and the totalizer is reset to 0.
hold The totaling process is stopped and the totalizer is set to its defined start value
from the
Preset value parameter.
Reset + totalize The totalizer is reset to 0 and the totaling process is restarted.