Instruction Manual
IM-106-910C, Rev. 1.0
November 2009
Hazardous Area
X-STREAM O
2
Transmitter
http://www.raihome.com
X-STREAM Oxygen Transmitters
READ THIS PAGE BEFORE PROCEEDING!
ESSENTIAL
INSTRUCTIONS
Emerson Process Management designs, manufactures and tests its products
to meet many national November 2009and international standards. Because
these instruments are sophisticated technical products,
you MUST properly
install, use, and maintain them
to ensure they continue to operate within
their normal specifications. The following instructions
MUST be adhered to
and integrated into your safety program when installing, using, and
maintaining Rosemount Analytical products. Failure to follow the proper
instructions may cause any one of the following situations to occur: Loss of
life; personal injury; property damage; damage to this instrument; and
warranty invalidation.
•
Read all instructions
prior to installing, operating, and servicing the
product.
• If you do not understand any of the instructions,
contact your
Emerson Process Management representative
for clarification.
•
Follow all warnings, cautions, and instructions
marked on and
supplied with the product.
• Inform and educate your personnel in the proper installation, operation,
and maintenance of the product.
•
Install your equipment as specified in the Installation Instructions
of the appropriate Instruction Manual and per applicable local and
national codes.
Connect all products to the proper electrical and
pressure sources.
• To ensure proper performance,
use qualified personnel
to install,
operate, update, program, and maintain the product.
• When replacement parts are required, ensure that qualified people use
replacement parts specified by Emerson Process Management.
Unauthorized parts and procedures can affect the product's
performance, place the safe operation of your process at risk,
and
VOID YOUR WARRANTY.
Look-alike substitutions may result in fire,
electrical hazards, or improper operation.
•
Ensure that all equipment doors are closed and protective covers
are in place, except when maintenance is being performed by
qualified persons, to prevent electrical shock and personal injury
.
The information contained in this document is subject to change without notice.
NOTES:
The 375 Field Communicator must be upgraded to System Software 2.0 with
Graphic License for operation with the X-STREAM O
2
Transmitter. The AMS
software must be upgraded to AMS 8.0 or above.
Contact Emerson Process Management’s Global Service Center (GSC) at
1-800-833-8314 to upgrade the 375 Field Communicator software to System
Software 2.0 with Graphic License.
