Emerson Rosemount ET310, Quick Start Manual

Page: 45 / 52

B Removal or repositioning of the magnetic
fixture
Prerequisites
• Ensure you have 4 x protective caps for the magnetic fixture and the
protective cap for the sensor.
• One person needs to hold the sensor in position while another follows
the procedure.
Procedure
1. Remove the 4 sensor securing bolts, washers, and nuts as displayed
in Figure B-1 , then place the protective cap back on the sensor and
set it aside.
Figure B-1: Magnetic fixture
A. Frame
B. Ball stud
C. Protective cap
D. Sensor securing bolts
E. Magnetic unit
2. Some one must hold the magnetic fixture in position.
3. Slide a flathead screwdriver under one of the magnetic units as
displayed in Figure B-2 .
January 2022 Quick Start Guide
Quick Start Guide 45