Emerson Rosemount ET310, Quick Start Manual

Page: 10 / 52

3 Mounting the transmitter with a strap
If you are using the strap mounting option, perform the tasks in this section.
If youa re using a magnetic fixture, skip this section and go to Mounting the
transmitter with a magnetic fixture .
3.1 Mounting the sensor
WARNING
Two people are required for this operation.
• Personal protective equipment (PPE) of gloves and safety glasses or full-
face visor are recommended
• Cut strap may have sharp edges
• Do not cut the strap while it is under tension because this action can
result in damage or injury
Procedure
1. Unbox the strap tensioner and strap from the packaging.
2. Feed the strap into one end of the strap tensioner and using the
flathead screwdriver or wrench and socket provided, turn the screw
on the tensioner until the end of the strap emerges from under the
worm drive (at least 5 turns of the worm-screw are required).
3. Remove the protective cap from the sensor.
Quick Start Guide January 2022
10 Emerson.com/Rosemount