Emerson Rosemount ET310, Quick Start Manual

Page: 33 / 52

NOTICE
The magnets used in the sensors have a high pull force. To avoid
damage, and to get the precise location for each sensor, initially
place the sensor at an angle to the vessel and then gently lower onto
the surface, as displayed in the following figure.
A. Place sensor at an angle to the vessel
B. Lower sensor onto the vessel
7. Ensure that the sensor is perpendicular to and in contact with the
vessel, as displayed in the following figure.
8. Fit the 4 sensor securing bolts, gridlock washers, and nuts from
magnetic fixture as shown in the following figure.
January 2022 Quick Start Guide
Quick Start Guide 33