Emerson Rosemount ET310, Quick Start Manual

Page: 26 / 52

4.1 Assemble the brackets to the sensor
Assemble the brackets to the sensor before installing the magnetic fixture.
Procedure
1. Remove parts shown in Figure 4-2 from the packing. Ensure all parts
in the figure are accounted for.
NOTICE
To prevent damage to the sensor, do not remove the sensor
protective cap before assembling the magnetic mount bracket.
Figure 4-2: Sensor attachment to magnetic fixture bracket and
fasteners
A. M8x30 ss a4-70 cap head hex x2
B. Anti-vibration washer x4
C. M8 Aerotight nut x2
D. Bracket part 1
E. Bracket part 2
F. Bracket part 3
2. Assemble the brackets to the sensor as displayed in Figure 4-3 .
Ensure the brackets are aligned and the fasteners are located and
oriented exactly as displayed.
Important
Ensure bolt heads are oriented on the side of the bracket assembly
displayed in the figure below.
Quick Start Guide January 2022
26 Emerson.com/Rosemount