Emerson Rosemount ET310, Quick Start Manual

Page: 11 / 52

CAUTION
Once the protective cap is removed, the strong magnetic field at the
end of the sensor can suddenly attract other objects, such as tools.
This can cause injury as well as damage to the sensor.
Only remove the protective cap when necessary and then take great
care. Ensure tools and fastenings are kept away from the sensor
when the cap is removed.
4. If the rubber shoe needs to be refitted, ensure the ring is still in place,
then fit the shoe onto the sensor by pushing the two pegs protruding
from the foot of the sensor into the holes in the shoe.
If the ring is missing, do not use the sensor.
Note
If the sensor is to be placed on a pipe less than 4 inches in diameter,
fit the alternative shoe.
A. Ring
B. Standard Shoe
C. Alternative Shoe
5. Carefully place the sensor in the required location on the pipe.
January 2022 Quick Start Guide
Quick Start Guide 11