Emerson Rosemount ET310, Quick Start Manual

Page: 38 / 52

6 Product certification
Rev 0.1
6.1 European Directive information
A copy of the EU Declaration of Conformity can be found at the end of this
guide. The most recent revision of the EU Declaration of Conformity can be
found at
Emerson.com/Rosemount .
6.2 Telecommunication compliance
All wireless devices require certification to ensure that they adhere to
regulations regarding the use of the RF spectrum. Nearly every country
requires this type of product certification. Emerson is working with
governmental agencies around the world to supply fully compliant products
and remove the risk of violating country directives or laws governing
wireless device usage.
6.3 FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including
interference that may cause undesired operation.
• This device must be installed to ensure a minimum antenna separation
distance of 20 cm from all persons.
6.4 Ordinary location certification from FM approvals
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by FM Approvals, a nationally recognized test laboratory
(NRTL) as accredited by the Federal Occupational Safety and Health
Administration (OSHA).
6.5 Installing equipment in North America
The US National Electrical Code ® (NEC) and the Canadian Electrical Code
(CEC) permit the use of Division marked equipment in Zones and Zone
marked equipment in Divisions. The markings must be suitable for the area
classification, gas, and temperature class. This information is clearly defined
in the respective codes.
Quick Start Guide January 2022
38 Emerson.com/Rosemount