Emerson Rosemount 848T, Reference Manual, Page: 37 / 136

29
Reference Manual
00809-0100-4697, Rev GA
Section 3: Configuration
November 2014
Configuration
82 FAILED_ENABLE Enabled FAILED_ALM alarm conditions. Corresponds bit for bit to the
FAILED_ACTIVE. A bit on means that the corresponding alarm condition is enabled
and will be detected. A bit off means the corresponding alarm condition is disabled
and will not be detected. This parameter is the Read Only copy of FD_FAIL_MAP.
83 FAILED_MASK Mask of Failure Alarm. Corresponds bit for bit to the FAILED_ACTIVE. A bit on
means that the failure is masked out from alarming. This parameter is the Read
Only copy of FD_FAIL_MASK.
84 FAILED_ACTIVE Enumerated list of failure conditions within a device. All open bits are free to be
used as appropriate for each specific device.This parameter is the Read Only copy
of FD_FAIL_ACTIVE.
85 MAINT_PRI Designates the alarming priority of the MAINT_ALM
86 MAINT_ENABLE Enabled MAINT_ALM alarm conditions. Corresponds bit for bit to the
MAINT_ACTIVE. A bit on means that the corresponding alarm condition is enabled
and will be detected. A bit off means the corresponding alarm condition is disabled
and will not be detected.This parameter is the Read Only copy of
FD_OFFSPEC_MAP.
87 MAINT_MASK Mask of Maintenance Alarm. Corresponds bit for bit to the MAINT_ACTIVE. A bit on
means that the failure is masked out from alarming.This parameter is the Read
Only copy of FD_OFFSPEC_MASK.
88 MAINT_ACTIVE Enumerated list of maintenance conditions within a device. All open bits are free to
be used as appropriate for each specific device. This parameter is the Read Only
copy of FD_OFFSPEC_ACTIVE.
89 ADVISE_PRI Designates the alarming priority of the ADVISE_ALM
90 ADVISE_ENABLE Enabled ADVISE_ALM alarm conditions. Corresponds bit for bit to the
ADVISE_ACTIVE. A bit on means that the corresponding alarm condition is enabled
and will be detected. A bit off means the corresponding alarm condition is disabled
and will not be detected.This parameter is the Read Only copy of FD_MAINT_MAP
& FD_CHECK_MAP.
91 ADVISE_MASK Mask of Advisory Alarm. Corresponds bit for bit to the ADVISE_ACTIVE. A bit on
means that the failure is masked out from alarming.This parameter is the Read
Only copy of FD_MAINT_MASK & FD_CHECK_MASK.
92 ADVISE_ACTIVE Enumerated list of advisory conditions within a device. All open bits are free to be
used as appropriate for each specific device. This parameter is the Read Only copy
of FD_MAINT_ACTIVE & FD_CHECK_ACTIVE.
Table 3-2. Resource Block Parameters
Number Parameter Description