Emerson Rosemount 2140, Reference Manual, Page: 44 / 144

34
Reference Manual
00809-0100-4140, Rev AA
Configuration
January 2017
Configuration
To change or view alarm and saturation levels
(Field Communicator)
1. From the Home screen, select 2: Configure .
2. Select 2: Manual Setup > 2: Analog Output > 5: Alarm/Saturation Levels .
3. Select 7: Config Alarm/Sat Levels .
4. Follow prompts to configure alarm and saturation levels.
(See
Table 2-5 , Table 2-6 , and Table 2-7 for reference).
Note
When messages about the loop appear, take appropriate safe action and select “OK”.
See
“Configuration basics” on page 10 for further information.
To change or view alarm and saturation levels
(AMS Device Manager)
1. Right click on the device, and select Configure .
2. Select Manual Setup , and then select Analog Output tab.
3. Click on the Configure Alarm and Saturation Levels button.
4. Follow screen prompts to configure Alarm and Saturation Levels.
(See
Table 2-5 , Table 2-6 , and Table 2-7 for reference).
Note
When messages about the loop appear, take appropriate safe action.
See
“Configuration basics” on page 10 for further information.
To change or view alarm and saturation levels (LOI)
1. Press any LOI button to activate the menu.
(See
Table 2-1 on page 8 for assistance with using the LOI buttons).
2. If changing the alarm and saturation levels setting:
a. Scroll down (

) and then select EXTENDED MENU (

).
b. Scroll down (

) and then select ALRM SAT VALUES (

).
c. Scroll down (

) to the desired option (“ROSEMOUNT VALUES”, “NAMUR VALUES”
or “CUSTOM VALUES”) and then select (

) it.
d. Follow screen prompts to configure Alarm and Saturation Levels.
(See Table 2-5 , Table 2-6 , and Table 2-7 for reference).
3. If viewing the alarm and saturation levels:
Fast keys
2, 2, 2, 5, 7