15
Reference Manual
00809-0100-4140, Rev AA
January 2017
To change or view the mode (Field Communicator)
1.
From the Home screen, select
2: Configure
.
2.
Select
2: Manual Setup
>
1: Operation
>
1: Application
.
3.
Select
1: Sensor Operation Mode
.
4.
If changing the mode setting:
a.
Select a mode: “Normal”, “Enhanced (Fault=Wet)”, or “Enhanced (Fault=Dry)”.
Note
When messages about the loop appear, take appropriate safe action and select “OK”.
See
“Configuration basics” on page 10
for further information.
To change or view the mode (AMS Device Manager)
1.
Right click on the device and select
Configure
.
2.
Select
Manual Setup
, and then select the
Operation
tab.
3.
If changing the mode setting:
a.
Select a mode: “Normal”, “Enhanced (Fault=Wet)”, or “Enhanced (Fault=Dry)” at
the
Sensor Operation Mode
field.
Note
When messages about the loop appear, take appropriate safe action and select “Next >”.
See
“Configuration basics” on page 10
for further information.
To change or view the mode (LOI)
1.
Press any LOI button to activate the menu.
(See
for assistance with using the LOI buttons).
2.
If changing the mode setting:
a.
Scroll down (
) and then select
EXTENDED MENU
(
).
b. Scroll down (
) and then select
SENSOR
(
).
c.
Select
SENSOR OPMODE
(
).
d. Follow on-screen instructions to select a new mode:
NORM (normal), EN WET (enhanced wet), or EN DRY (enhanced dry).
3.
If viewing the mode setting:
a.
Select
VIEW CONFIG
(
).
b. Scroll down (
) until
OPMODE
and the mode setting appears.
4.
Exit the menu system by either waiting one minute for the
EXIT MENU?
prompt, or
scrolling down menus to find and select
BACK TO MENU
and
EXIT MENU
.
Summary of Contents for Rosemount 2140
