9
Reference Manual
00809-0100-4140, Rev AA
January 2017
2.4.2
Switching HART revision with Field Communicator
1.
From the Home screen, select
2: Configure
.
2.
Select
2: Manual Setup
>
5: HART
(or
6: HART
if Scaled Variable is available).
3.
Select
2: Communication Settings
>
4: Change HART Revision
.
4.
Change the HART revision.
Note
When messages about the loop appear, take appropriate safe action and select “OK”.
See
“Configuration basics” on page 10
for further information.
2.4.3
Switching HART Revision with AMS Device Manager
1.
Click on
Manual Setup
, and then select the
HART
tab.
2.
Select
Change HART Revision
and then follow the on screen prompts.
Note
AMS Device Manager versions 10.5 or greater are compatible with HART Revision 7.
Note
When messages about the loop appear, take appropriate safe action and select “Next >”.
See
“Configuration basics” on page 10
for further information.
2.4.4
Switching HART revision with Local Operator Interface
1.
Press any LOI button to activate the menu.
(See
for assistance with using the LOI buttons).
2.
Scroll down (
) and then select
EXTENDED MENU
(
).
3.
Scroll down (
) and then select
HART REV
(
).
4.
To change HART revision:
a.
Select
HART REV 5
(
) or scroll down (
) and select
HART REV 7
(
) to switch.
5.
Exit the menu system by either waiting one minute for the
EXIT MENU?
prompt, or
scrolling down menus to find and select
BACK TO MENU
and
EXIT MENU
.
Note
When messages about the loop appear, take appropriate safe action and select “
”.
See
“Configuration basics” on page 10
for further information.
Fast keys
2, 2, 5 [or 6], 2, 4
Summary of Contents for Rosemount 2140
