4.
Loosen the hydraulic shock absorber (
25
) in the stop sleeve
(
27
) by turning half a turn (dimension
E
3
: max. 0.5 mm).
NOTICE!
Only the plunger of the hydraulic shock absorber (
25
)
may extend from the stop sleeve (
27
).
5.
Retighten the lock nut (
26
) of the hydraulic shock absorber
with tightening torque
M
A
according to the following table.
10 Disposal
O
Dispose of the mini slide in accordance with your country’s
national regulations.
Piston Ø [mm]
8
12
16
20
25
M
A
[Nm]
1.4
1.4
1.4
5.2
13.6
E
3
25
27
M
A
26
1.
Release the lock nut (
26
) of the hydraulic shock absorber and
remove the hydraulic shock absorber (
25
) from the stop sleeve
(
27
) by unscrewing it.
2.
Manually position the slide (
1
) in the desired end position and
secure it against accidental travel.
3.
Turn the new hydraulic shock absorber (
25
) into the stop
sleeve (
27
) until the slide (
1
) moves.
NOTICE
Damage to the stroke limitation bolt!
If the end stop is set incorrectly, the mini slide moves against
the stroke limitation bolt (
9
).
O
Make sure that the mini slide always moves against the end
stop/stroke limitation bolt (
9
) with the stop sleeve (
27
).
O
Only the plunger of the hydraulic shock absorber (
25
) may
extend from the stop sleeve (
27
).
You can replace the hydraulic shock absorber (
25
) without
losing the stroke setting. Use only AVENTICS shock
absorbers.
25
26
27
1
1
AVENTICS
| MSC |
R41209736–BAL–001–AF
| English
28
