EMBRON Hatteland HD 19T22, User Manual

Page: 50 / 142

50
IND100129-204
All specifications are subject to change without prior notice!
Specifications - HD 26T22 MxC-xxx-xxxxxx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hattelandtechnology.com for the latest electronic version.
2/2 2/2
These products have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) IACS E10 IP66 EU RO MR - Mutual Recognition ClassNK - Nippon Kaiji Kyokai
CCS - China Classification Society
A P P R O V A L S & C E R T I F I C A T E S
• W:621.00 [24.45''] x H:435.00 [17.13''] x D:95.50 [3.76''] mm [inch]
• Weight: Approx. 15.0 kg / 33.0lbs
Physical Considerations:
• LED Backlight Technology, TFT Active-matrix
• 25.54 inch viewable image size, Widescreen, Aspect Ratio 16:10
• S-MVA (Multi-domain Vertical Alignment) Technology, RGB Vertical Stripe
TFT Technology:
• Native Resolution : 1920 x 1200
• Pixel Pitch (RGB) : 0.2865 (H) x 0.2865 (V) mm
• Response Time : 20ms (Tr+Tf)
• Contrast Ratio : 1500:1 (typical)
• Light Intensity : 350 cd/m
2
(typical)
• Viewable Angle : +/- 88 deg. (typical) (Up/Down/Left/Right)
• Active Display Area : 550.08 (H) x 343.8 (V) mm
• Max Colors : 16.7 million
TFT Characteristics:
• Operating : Temperature -15 deg. C to +55 deg. C
• Storage : Temperature -20 deg. C to +60 deg. C
• Humidity : Up to 95% (Operating / Storage)
• IP-Rating Protection : IP66 front - IP20 rear (EN60529). IP22=option
• Compass Safe Distance : Standard: 190cm - Steering: 110cm
• CPU Fan Cooler/Heatsink : Rear external air flow. FAN speed temp. c ontrolled
Lifetime Considerations:
Even though the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, Brightness Control (-/+)
• Power LED, Mode Status Indicators (ECDIS, HDD, Service)
• Buzzer (through glass), Light Sensor (behind glass)
Environmental Considerations:
User Controls:
Connector Rear
• Ethernet GBLan : 5 x RJ-45
• COM RS-232 & 422/485 : 1 x DB9M non-isolated (Change RS mode in BIOS)
• USB2.0 (<5m) : 2 x USB Type A (4-pin)
• USB3.0 (<3m) : 2 x USB Type A (9-pin)
• DP++ 1.2 OUT : 1 x DisplayPort Female (Dual-Mode DP++)
• AC Power IN : 1 x Std IEC inlet
• If DC Power IN option : 1 x 2-pin Terminal Block 5.08 (Factory option)
• If SSD Trays option : 2 x 2.5" Sized Tray/Bay (Factory option)
Input/Output Connectors:
• Projected Capacitive Touch Screen (Multitouch,USB,Pen/Glove support)
• Optical Bonding Technology
• Color Calibrated models (ECDIS)
• Multipower (AC+DC) or AC only model
• Model with 2 x physical 2.5'' removable Disk Bay/Tray
• IP22 Model (Factory Mounted internal gaskets)
• Variations of SSD Storage, RAM Memory, Operating System, CPU
• 1 or 2 x PCA200828-1: 4xCOM RS-422/485 isolated NMEA 4 channel
• 1 x ZIA0001310-B: CAN isolated 2 channel
• 1 x ZIA0001310-SLCAN: CAN isolated 2 channel, socketCAN
• 1 x VSD101121-1: 2W Amplified Audio out via 3x3.5mm Jack
• 1 x PCA100297-1: Isolated Digital IO module,4 x Output/4 x Input
• 1 x PCA100298-1: LAN 10/100Mbps, 2 ports RJ45
• 1 or 2 x PCA100309-1: Dual Isolated RS-232, 2xDB9 module
• 1 x Q170 IO: 1xNMEA RS422/485 i2xDig. In&Out (Low side switch)
Factory Options:
• JH C01MF A-A : 1 x USB Cable 1m, TypeA-Chassis mount receptacle
• HD VED SX2-J1 : 1 x VESA Adapter (100/100 & 200/100mm)
Not EN60945 Tested
• HD TMB SX1-C1 : 1 x Table Mount Bracket. EN60945 Tested
• HD CMB SX2-F1 : 1 x Console Mount Kit. EN60945 Tested
• HD 26COV SX1-A1 : 1 x UV Sun Cover
• HD 26TAP SX 1-A1 : 1 x Frame Adapter for JH 27T11 MMD Cutout (Retrofit)
• P007178-1 : 1 x IP66 Mount Gasket (EPDM), for Flush/Console mount
• HT 00262 OPT-A1 : 4 x RS-422/RS-485 isolated, USB ext. module
• HT 00263 OPT-A1 : 4 x RS-232 COM non-isolated, USB ext. module
• HT 00264 OPT-A1 : 1 x CAN isolated, 2 channel, USB ext. module
• HT 00273 OPT-A1 : 4 x Digital IN/OUT isolated, USB ext. module
• HT 00274 OPT-A1 : 2 x LAN 10/100Mbps, RJ45, USB ext. module
• JH 26TAP STD-A1 : 1 x Frame Adapter for Series 1 Cutout (retrofit)
• HT 00300 MSOS : OS options: https://www.hattelandtechnology.com/os
• HD 000TR SX2-A2 : 1 x Removable Front Tray 2.5" Empty
• HD xxxyy SX1-z1 : 1 x Removable Front Tray 2.5" w/Storage Device*
*Where xxx=Size of device. yy=GB,TB. z=S (SSD) - Choose Device from table.
Available Accessories:
Power Supply option:
• 115&230VAC - 50/60Hz or Multipower: 115&230VAC - 50/60Hz + 24VDC
Note: You may connect either AC power or DC power or both. In case both sources
are connected, power will be sourced from the AC input. If AC input is lost, there will
be a uninterrupted switch-over to DC input.
Power Consumption:
• Operating AC/DC: 79W (typ) - 156W (max)
• Operating AC: 79W (typ) - 250W (max)
Power Specifications:
Computer Specifications:
• OS Options : See table below or customized image on request.
• Internal Storage : 1 x SSD SATA, Type m.2. See table below.
• Removable Storage
Factory Option
: 1 or 2 x 2.5" SSD SATA
See table below.
• CPU/ Processor : 1 x Intel® Quad Core™ i5-6500TE, 2.3/3.3GHz,
6MB Cache or see table below.
• Memory : See table below
• System Chipset : Intel® GL82Q170 PCH
• Graphics Chipset : Intel® HD Graphics xxx (dependent on CPU)
See table below for details.
• Ethernet LAN #1 : Intel® I219LM Gigabit LAN 10/100/1000Mbps
Supports Intel® Teaming
• Ethernet LAN #2/#3 : Intel® I211AT Gigabit LAN 10/100/1000Mbps
Supports Intel® Teaming
• Ethernet LAN #4/#5 : Realtek RTL8111G-CG Gigabit LAN
10/100/1000Mbps
• Audio Chipsets : Realtek HD AUDIO ALC662 (on-board)
• BIOS : EFI, ACPI Support. Preconfigured by factory.
• PC-Beeper / Buzzer : Onboard PC-Beeper
3500Hz Buzzer (according to IEC60945/IACS-E10)
• Watchdog Timer : 256 Segments, 0, 1, 2...255 sec/min
• Power Manager : AT, ACPI (S3/S4)
• Monitoring : Temperature, Fan and voltages status
• Other Features : TPM2.0, GPIO, LAN Wakeup, USB Boot and Wakeup
• DP++ Out Max Res. : 640 x 480 to 4096 x 2304 @ 60Hz
Available Computer Configurations:
Type Description Size/Specification
CPU 1 x Intel® Quad Core™ i5-6500TE, 2.3/3.3GHz, 6MB Cache
or 1 x Intel® Quad Core™ i7-7700T*, 2.9/3.8GHz, 8MB Cache
or 1 x Intel® Dual Core Celeron™ G3900TE, 2.3/2.3GHz, 2MB Cache
*Supported only by Windows ® 10 IoT Enterprise
Graphics
Chipset
For all Intel® HD Graphics xxx Chipsets: Video Max Memory: 64GB,
Supports: DirectX 12, OpenGL 4.4, OpenCL 2.0.
- 6500TE CPU: 530 ,350Mhz,Max Dynamic Freq:1GHz (384GFLOPS)
- G3900TE CPU: 510 ,350Mhz,Max Dynamic Freq:0.95GHz (182GFLOPS)
- 7700T CPU: 630 ,350Mhz,Max Dynamic Freq:1.15 GHz (442GFLOPS)
Memory 2 x 260-pin DDR4-2133, Dual Channel - 8GB, 16GB, 32GB(Max)
Storage 1 x SSD SATA Type m.2 internal
Enterprise 24/7, (according to JESD218
standard with JESD219 workload).
Power loss protection.
- 240 GB (599 TBW)
- 480 GB (945 TBW)
- 960 GB (1750 TBW)
Storage 2 x 2.5" SSD SATA via Removable Tray - 240 GB (599 TBW)
- 480 GB (945 TBW)
- 960 GB (1750 TBW)
Operating System (OS) Options:
Windows® 7 Pro. for Embedded Systems (1-2 CPU)
(End of support July 2017, Product Distribution End Date Sep. 2024)
Windows® 7 Ult. for Embedded Systems (1-2 CPU)
(End of support July 2017, Product Distribution End Date Sep. 2024)
Windows® Emb. Standard 7 (Toolkit & Runtime) - All Versions
(End of support July 2017, Product Distribution End Date July 2025)
Windows® 10 IoT Enterprise 2019 LTSC (64bit)
(Product Distribution End Date January 2029)
or:
Linux (Skylake: kernel 4.4 or later).
Notes - See also Accessories (HT 00300 MSOS) Operating System options.
- 32bit or 64bit OS versions available where applicable.
- Review "SSD Selection Guide" in manual.