EMBRON Hatteland HD 19T22, User Manual, Page: 37 / 142

37
IND100133-65
Connection area of 24, 26 and 27 inch units (illustration)
Physical Connections
- +
POWER INPUT:
Connect your DC power cable to the 2-pin Terminal Block 5.08 connector. The internal DC power module supports
24VDC. Please check specifications for your unit.
POWER INPUT:
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input. Please check
specifications for your unit.
Multi-power note: (For units supporting AC & DC input simultaneously)
The unit has a dual input power supply which will accept both AC and DC input. If both inputs are connected, the
unit will be powered by AC. If AC is disconnected it will automatically switch over to DC without affecting the operation
of the unit. This makes it possible to use AC power as primary power and a 24V battery as secondary power,
eliminating the need for expensive UPS systems.
Note: 24 inch unit used as example above, same applies for 26 and 27 inch.
Reduce Cable Tension
To reduce tension on the cables you connect, secure them with a cable tie
to the available chassis hinges located near the connectors. Note that the
actual position of these hinges may vary depending on the specific unit.
Grounding Screw Power
1 x RS-232 & RS-422/RS-485 COM
Power Inputs DC & AC
2 x USB2.0 2 x RJ45 Network (4 / 5) 2 x Removable Storage Trays
1 x DisplayPort Out
Expansion Area for
Optional Modules
2 x USB3.0
1 x RJ45 Network (3) 1 x RJ45 Network (2)
1 x RJ45 Network (1)
Grounding Screw Module(s)
Grounding Screw Module(s) Grounding Screw Module(s)
Connection area of 19 inch unit (illustration)
Grounding Screw Power
1 x RS-232 & RS-422/RS-485 COM
Power Input AC
2 x USB2.0
2 x RJ45 Network (4 / 5)
2 x Removable Storage Trays
1 x DisplayPort Out
Expansion Area for
Optional Modules
2 x USB3.0
1 x RJ45 Network (3)
1 x RJ45 Network (2)
1 x RJ45 Network (1)
Power Input DC
1 x Audio AMP (Option) Grounding Screw Power Grounding Screw Module(s)