EMBRON Hatteland HD 19T22, User Manual, Page: 38 / 142

Physical Connections
38
IND100133-65
GROUNDING SCREWS:
Several Grounding Screws are available on unit. Depending on factory installed modules, choose any of the
nearby Grounding Screws located near modules (Expansion) area. See references in illustration above.
Please review “General mounting instructions” in the “Installation” chapter, pt. 7 for more information.
Note for Grounding Screws:Standard Grounding Screw/Bolt provided by Hatteland Technology is “Pan head screws
M4x8mm w/spring and plainwasher”.
DP (DisplayPort) OUT :
Allows for an additional signal output from the computer. Based on the Operating System (OS), options can be to
Clone (Duplicate), Extend Desktop or make external display “Main” screen for the OS. Use a DP++1.2 compliant 20
pins cable. The DP has its own locking mechanism that locks the plug inserted. Make sure the plug “clicks” into place
to verify a proper and secure
connection.
COM1 Serial Port INPUT / OUTPUT:
Supports RS-232 and RS-422/485 using D-SUB 9P connector (male). Fasten the cable to the connector using the
provided screws on the cable housing itself. Enter BIOS to change RS protocol mode and review Pinout Assignments
details for correct pinning/wiring.
Network (1, 2, 3, 4, 5) INPUT / OUTPUT:
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector.
USB2.0 (1, 2) INPUT / OUTPUT:
Supports USB1.1 (<10m, 12Mbps) and USB2.0 (<5m, 480Mbps) compliant peripherals. Drivers for most USB devices
are usually included in operating system or on separate installation DVD’s delivered with Third Party products.
USB3.0 (1, 2) INPUT / OUTPUT:
Supports USB3.0 (<3m) compliant peripherals. Drivers for most USB devices are usually included in operating system
or on separate installation DVD’s delivered with Third Party products.