76
EN
•
Add Display Mode
Method One:
1- Click “Customize Display Modes” in the above interface and then set the screen mode.
2- Add the cameras and adjust the cameras’ display sequence as required.
3- Click “Save” button under the display mode list and then enter the display mode name in the popup window, click “OK” button to save the current display
mode.
Method Two:
1- Click Start
Settings
System
Basic
Output Settings to go to the interface and then set the screen mode.
2- Double click the camera or camera group in the list to add them to the selected window.
3- Click
to save the current display mode (refer to 5.2.4 Scheme View In Sequence for detail configurations). The display mode will be saved and
displayed in the display mode list in the live preview interface.
•
Edit Display Mode
Click “Customize Display Modes” tab in the live preview interface and then select one display mode in the list. Click “Rename” to edit the display mode name;
click “Delete” to delete the display mode.
5.2.2 Quick Sequence View
You can start quick sequence view if the scheme has not been created. If the scheme has been created, please refer to 5.2.4 Scheme View in Sequence for
details.
Go to the live preview interface and then click
to pop up a little window. Set the dwell time in the window and then click
to view the live group by
group according to the camera number of the current screen mode. Double click the sequence view interface to pause the view; double click again to restore
the view. Click
to stop the view.
5.2.3 Camera Group View In Sequence
You can start camera group view in sequence if camera group has been created (see 4.2.1 Add Camera Group for details).
1- Go to the live preview interface and then select a camera window.
Summary of Contents for 46241.F16H
Page 122: ...120 EN ...
Page 123: ...121 EN ...
