72
EN
There are some function items on the left side of the camera management interface. Click each item to go to corresponding interface or window. For instance,
click “Add Camera” to pop up the window as shown below.
Click the main menus on the top of the camera management interface to go to corresponding interfaces. Refer to the picture below. For instance, you can go
to system setup interface by clicking “System” tag.
3.2.3 Main Functions
•
Camera
The module covers the functions such as
Camera Management
(see Chapter 4 Camera Management for details),
Image Settings
(see 5.3 Preview Image
Configuration for details),
Motion
(see 9.2.1 Motion Configuration for details) and
PTZ
(see Chapter 6 PTZ for details) and so on.
•
Record
The module covers the functions such as
Encode Parameters
and
Record Schedule
and so on. Please see Chapter 7 Record & Disk Management for
details.
•
Disk
The module covers the functions such as
Disk Management
,
Storage Mode
and
Disk Information
and so on. Please see Chapter 7 Record & Disk
Management for details.
•
Alarm
The module covers the functions such as
Sensor and Motion Alarm Handling
and
Alarm Out Settings
. Please see Chapter 9 Alarm Management for
details.
•
Network
The module covers the functions such as
TCP/IPv4
,
DDNS
,
Port
,
and
Network Status
and so on. Please see 11.1 Network Configuration for details.
•
Account and Authority
The module covers the functions such as
Account Management
(see 10.1 Account Management for details) and
Permission Management
(see 10.3 Permission Management for details) and so on.
•
System
The module covers the functions such as
Basic Configuration
(see 11.2 Basic Configuration for details),
Device Information
(see 11.7 View System
Information for details),
Log Information
(see 11.6 View Log for details) and
Configuration File Import&Export
(see 11.5 Backup and Restore for details)
and so on.
Summary of Contents for 46241.F16H
Page 122: ...120 EN ...
Page 123: ...121 EN ...
