73
EN
4 Camera Management
4.1 Add/Edit Camera
4.1.1 Add Camera
The network of the NVR should be set before adding IP camera (see 11.1.1 TCP/IPv4 Configuration for details).
Refer to the pictures below. Click
Add Camera
in the setup panel or
in the top right corner of the preview window to pop up the “Add Camera” window
as shown below. You can quickly add or add the IP camera manually.
•
Quickly Add
Check the cameras and then click “Add” to add cameras. Click
to edit the camera’s IP address, username and password and so on. Click “Default
Password” to set the default username and password of each camera.
•
Add Manually
Input the IP address, port, username and password of the camera and then select the protocol. Click “Test” to test the effectiveness of the input information
and then click “Add” button (you can input one camera’s information or above such as IP address, username and password before clicking “Add” button). Click
to delete the camera. Click “Default Password” to set the default username and password of each camera.
4.1.2 Edit Camera
Click “Edit Camera” in the setup panel to go to the interface as shown below. Click
to view the live image of the camera in the popup window. Click
to edit the camera (see
Add camera
in 3.1 Startup Wizard for details). Click
to delete the camera.
Summary of Contents for 46241.F16H
Page 122: ...120 EN ...
Page 123: ...121 EN ...
