WOP-2ac-LR2. User manual
31
•
•
•
•
•
•
•
•
•
•
4.6.2 The 'QoS' submenu
In the 'QoS' submenu, you may configure Quality of Service functions.
WMM
– WMM support activation (Wi-Fi Multimedia);
Enable QoS
– when the flag is set, the setting of Quality of Service functions is available;
AP EDCA parameters
– access point settings table (traffic is transmitted from the access point to the
client):
Queue
– predefined queues for various kinds of traffic:
Data 3 (Background)
– low priority queue, high bandwidth (1p: cs1, cs2 priorities);
Data 2 (Best Effort)
– middle priority queue, middle bandwidth and delay. Most of the
traditional IP data is sent to this queue (802.1p: cs0, cs3 priorities);
Data 1 (Video)
– high priority queue, minimal delay. In this queue, time-sensitive video data
is automatically processed (802.1p: cs4, cs5 priorities);
Data 0 (Voice)
– high priority queue, minimal delay. In this queue, time sensitive data is
automatically processed, such as: VoIP, streaming video (802.1p: cs6, cs7 priorities).
AIFS
– Arbitration Inter-Frame Spacing, defines the waiting time of data frames, measured in slots,
takes values (1-255);
cwMin
– the initial timeout value before resending a frame, specified in milliseconds, takes the
values 1, 3, 7, 15, 31, 63, 127, 255, 511, 1023. The value of cwMin cannot exceed the value of
cwMax;
