WOP-2ac-LR2. User manual
29
•
•
•
•
•
•
•
•
•
•
•
•
•
4.6 The 'Radio' menu
In the 'Radio' menu you can configure the wireless interface
4.6.1 The 'Radio' submenu
In the 'Radio' submenu, you can configure the device’s radio
interface.
Mode
– select interface operation mode:
IEEE 802.11b/g
IEEE 802.11b/g/n
IEEE 802.11n
Channel
– select channel for data transmission;
Channel Bandwidth, MHz
– channel bandwidth, on which the base station operates. The parameter may
take values of 5, 10, 20 and 40 MHz. If the base station has 5 or 10 MHz bandwidth, you should select
the same bandwidth on the user station;
Fixed center frequency
– when the flag is checked, all traffic (data and management packets) will be
transmitted on the specified center channel frequency with a given bandwidth (40 MHz). The function is
proprietary, the transmission is not carried out according to IEEE 802.11 standards, where it is supposed
to use different center frequencies for data traffic and management with 40 MHz bandwidth.
Tx Power (dBm)
– transmitting Wi-Fi signal power adjustment, dBm.
Fixed Transmit Rate
– fixed wireless data transmission rate which is defined by IEEE 802.11b/g/n
standards.
ACK Timeout, µs
– time for delivery confirmation from the subscriber.
Polling
– when checked the option is enabled, otherwise – disabled. Polling is one of the variants of
TDM access to the medium (time division). Characterized by a constant customer survey by the BS;
MAX TX Duration, ms
– a time indicating how long the subscriber station can transmit traffic;
Management packet modulation
– fixed rate for management packets.
